How to Program Table 6 the Program Memory "Eeprom" ("F7: Programming") Opel Senator B

Program Memory "EEPROM", Program

The data stored in the "EEPROM" memory can be modified with the TECH 1 if the program memory contents do not match the nominal values.

A precondition for the programming of the "EEPROM" program memory is:

· ATWS control unit functions correctly (no trouble code 55).

Put TECH 1 into programming mode by pressing key "F7:PROGRAMMING".

CODE No. programming:

Adjust TECH 1 display "ELECT COUNTRY CODE" to desired COUNTRY CODE by actuating arrow keys.

Then start the programming operation by actuating the "ENTER" key.

A survey of the COUNTRY CODES available can be found in Table 3.

Table 6, "F7:PROGRAMMING"

The following TECH 1 displays appear if the programming is carried out correctly.

If a fault occurs, display no. 4 appears

After programming the COUNTRY CODE and various internal data, access is given to the main menu.