Anti - theft Warning System ATWS System Modification F7: PROGRAMMING
PROGRAMMING COUNTRY CODE
| Conditions for Checking | Nominal Value |
Ignition ON
Press F7 in the system main menu. Follow the instructions in the TECH 1 display.
Start programming
| After the programming is started, the country code to be programmed is required. There is a choice between the following countries: |
· Germany (or Europe, except for the countries mentioned below) "D"
· Great Britain "GB"
· Switzerland "CH"
· Netherlands "NL"
| GERMANY |
GR. BRITAIN
SWITZERLAND
| NETHERLANDS | |
|---|---|
| If the display on the right appears after programming, programming was successful. | PROGRAMMING |
COUNTRY CODE
OKAY
If the display on the right appears after programming, a fault has occurred during programming. The following
actions should be taken consecutively:
· Read trouble code; no trouble code must be stored;
· Repeat programming;
· Perform TECH 1 self - test;
· Check TECH 1 cable for damaged insulation and shielding;
| · Repeat programming with a new control unit; | PROGRAMMING |
COUNTRY CODE
| FAILED |