Adjustment Values/Checking Values
| Valve clearance | mm | Inlet: 0.23 - 0.35 |
|---|---|---|
| Exhaust: 0.25 - 0.35 | ||
| Ignition timing | Indicator marks on timing belt housing to align with notch on crankshaft pulley-ignition timing is non-adjustable | |
| Spark plugs - electrode gap | mm | 1.05 |
| Compression | kPa | The pressure difference between any single cylinder of the entire engine should not be more than 100. |
| Pressure loss test | The pressure loss of an engine in perfect condition per cylinder is approximately 25%. | |
| Idle Speed | rpm | 750* |
| CO content (at idle speed/at 2800 to 3200 rpm) | vol.% | 0.5/0.3 |
| Ignition timing at idle speed | -°CA BTDC | 20* |
* Adjustment not possible, electronically controlled.