Steering Wheel Replacement
| Callout | Component Name |
|---|
| Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement . |
| 1 | Steering Wheel Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 37 N·m (27 lb ft) |
| 2 | Steering Wheel Procedure Disconnect the electrical connectors as needed. Remove the steering wheel using puller J 1859-A with puller legs J 36541-A . Make an alignment mark to note the relationship between the steering wheel and the steering shaft. The marks will be needed to align the wheel during installation. Special Tools • J 1859-A Steering Wheel Puller • J 36541-A Steering Wheel Puller Legs |
