| Engine / (vehicle variant) | Z 10 XEP Z 12 XEP (L 08) | Z 10 XEP Z 12 XEP (L 68) Z 14 XEP Z 13 DTJ (L08 / L 68) | Z 16 LEL / Z 16 LER (L08 / L 68) | Z 13 DTH (L08 / L 68) | Z 17 DTR (L08 / L 68) | ||
|---|---|---|---|---|---|---|---|
| Brake calliper | |||||||
| Piston diameter | mm | 54.0 | 54.0 | 57.0 | 54 | 57.0 | |
| Brake disc | |||||||
| Outside diameter | mm | 257.0 | 257.0 | 308.0 | 284.0 | 278.0 | |
| Thickness new | mm | 12.0 | 22.0 | 25.0 | 22.0 | 26.0 | |
| Permissible remaining thickness after precision turning 1) | mm | 11.0 | 20.0 | 23.0 | 20.0 | 24.0 | |
| Minimum thickness | mm | 9.0 | 19.0 | 22.0 | 19.0 | 23.0 | |
| Permissible runout | mm | 0.11 | 0.11 | 0.11 | 0.11 | 0.11 | |
| Permissible score depth | mm | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | |
| Non-uniform thickness (permissible tolerance) | mm | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| Engine | Z 10 XEP Z 12 XEP (L 08) | Z 10 XEP Z 12 XEP (L 68) Z 14 XEP Z 13 DTJ Z 13 DTH (L08 / L 68) | Z 16 LEL / Z 16 LER / Z 17 DTR (L08 / L 68) | ||
|---|---|---|---|---|---|
| Brake linings | |||||
| Thickness without lining plate – new | mm | 18.0 | 24.0 | 24.0 | |
| Permissible remaining thickness without lining plate | mm | 2.0 | 2.0 | 2.0 |
1
) When this dimension has been attained, new brake linings may only be installed once more in accordance with the minimum thickness.