Clock
The clock is only fitted if no TID, MID or GID is provided.
Setting the time:
- Press the reset button for more than 2 s, hours flash at a frequency of 1 Hz.
- By pressing the reset button repeatedly (for less than 2 s), the desired hour display can be set.
- Press reset button for more than 2 s: Hours are stored and it changes to the minute setting.
- By pressing the reset button repeatedly (for less than 2 s), the desired minute display can be set.
- Press reset button for more than 2 s: Minutes are stored and the clock setting is complete. The seconds then start at 0.
The clock can also be set by Tech 2.