Field Remedy: 1774
| Subject: | Engine Z13DT (Corsa-C only) - No A/C-ECC after ECU programming |
| Models: | Engines: | Option: |
|---|
| Corsa-C 2004...2005 | Z13DT | A/C,ECC |
| Complaint: | The A/C compressor will be not activated after SPS programming of a P&A ECU. |
|---|
| Cause: | No CAN signal from ECU to BCM to activate A/C compressor. ECU is configured as Agila ECU (without CAN) if current is interrupted (ignition off, voltage drop) during SPS programming. |
| Production: | |
Remedy:
Quick Information 1774 is invalid please use Quick Information 1843 instead.
| FunctionalGroup: | J - Engine |
|---|
| Complaint Group: | 04 - Electrical failures |
| Trouble Code: | None |
