Anti-theft Warning System ATWS System Modification F7:PROGRAMMING
PROGRAMMING COUNTRY CODE
| Conditions for Checking | Nominal Value |
Affected terminals: -
Possible trouble codes: -
Ignition ON
Press key F7 in the system main menu, select the desired test using the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.
Start programming
After the programming is started, the country code to be programmed is required. There is a choice between the following countries:
· Germany (or Europe, except for the countries mentioned below) "D"
· Great Britain "GB"
· Switzerland "CH"
| · Netherlands "NL" | GERMANY |
GR. BRITAIN
SWITZERLAND
NETHERLANDS
| If the display on the right appears after programming, programming was successful. | PROGRAMMING |
COUNTRY CODE
OKAY
If the display on the right appears after programming, a fault has occurred during programming. The following actions should be taken consecutively:
· Read trouble code; no trouble code may be stored;
· Repeat programming;
· Perform TECH 1 self-test;
· Check TECH 1 cable for damaged insulation and shielding;
· Repeat programming with a new control unit;
| PROGRAMMING |
COUNTRY CODE
FAILED