| B-03, F0: DATA LIST | ||
|---|---|---|
| Test | Work Order Description | Nominal Value |
| T02 | Tester Display ENGINE REQUEST | |
| Ignition ON | RECEIVED | |
| Note: After ignition ON, the engine control unit requests the "immobiliser-signal" from the immobiliser control unit. Diagnostic tester indicates whether the immobiliser control unit has received a request signal from the engine control unit. For diesel engines without electronic engine management system the diagnostic tester always shows NOT USED. | ||
| Concerned Terminals: 2 | ||
| Yes: T03 | No: C-05 |
Home/Opel/Calibra/Opel Calibra I (1990-1997)/Repair manual/Immobiliser/F0:Data List Test Step T02 Engine Request
Contents
Section: Immobiliser- Introduction
- The Opel/vauxhall Checking System
- General Instructions/safety Measures
- Checking Equipment
- Abbreviations, Definitions
- Features Specific to This System
- Block Diagram - Petrol Engines and 25DT Diesel Engine
- Checking with Tech 1
- General Information on Checking
- How to Connect to Vehicle the Tech 1
- F0:Data List - Petrol Engines and 25 Dt Diesel Engine
- F0:Data List - Test Step 01 Ignition Status
- F0:Data List - Test Step 02 Diesel Cutoff S.
- F0:Data List - Test Step 03 Eng. Check Light
- F0:Data List - Test Step 04 Engine Request
- F0:Data List - Test Step 05 Vehicle Speed
- F0:Data List - Test Step 06 Veh.speed Output
- F0:Data List - Test Step 07 Transponder Key
- F0:Data List - Test Step 08 Transp. Key St.
- F0:Data List - Test Step 09 Transp.key 1 St.
- F0:Data List - Test Step 10 Transp.key 2 St.
- F0:Data List - Test Step 11 Transp.key 3 St.
- F0:Data List - Test Step 12 Transp.key 4 St.
- F0:Data List - Test Step 13 Transp.key 5 St.
- F0:Data List - Test Step 14 Immobiliser Sig.
- F0:Data List - Test Step 15 Security Wait T.
- F0:Data List - Test Step 16 Immo.check Light
- F0:Data List - Test Step 17 Immo. Relay
- Explanation of Tables
- How to Check the Table 1, Diagnostic Plugs X13, Xd and Voltage Supply K117
- Table 2, Trouble Code Table
- Table 2, Trouble Code Table, TC 11 Transponder Key Problem
- Table 2, Trouble Code Table, TC 12 Wrong Transponder Key
- Table 2, Trouble Code Table, TC 13 Immobiliser Not Programmed
- Table 2, Trouble Code Table, TC 14 No Transp. Key Programmed
- Table 2, Trouble Code Table, TC 15 Vehicle Speed Signal Voltage Low
- Table 2, Trouble Code Table, TC 16 Vehicle Speed Signal Voltage High
- Table 2, Trouble Code Table, TC 17 No Engine Request Received
- Table 2, Trouble Code Table, TC 18 Engine Check Light Circuit
- Table 2, Trouble Code Table, TC 19 Immo.check Light Voltage Low
- Table 2, Trouble Code Table, TC 20 Immo.check Light Voltage High
- Table 2, Trouble Code Table, TC 21 Immo. Relay Voltage Low
- Table 2, Trouble Code Table, TC 22 Immo. Relay Voltage High
- Table 2, Trouble Code Table, TC 55 Replace ECU
- Table 3, Part and Catalogue Numbers
- Table 5, F5:Actuator Test Immo. Check L. (Immo. Control Unit)
- Table 5, F5:Actuator Test Immo. Relay (Immo. Control Unit)
- Table 5, F5:Actuator Test Immo.signal Test (Engine Control Unit)
- Table 6, F6:MISC. Tests
- Table 7, F7:PROGRAMMING Survey of Programming for Immobiliser
- Table 7, F7:PROGRAMMING Note
- How to Program the Table 7, F7:PROGRAMMING Transponder Key
- General Instructions / Safety Measures
- Table 7, F7:PROGRAMMING Transponder Key, Erase
- How to Program the Table 7, F7:PROGRAMMING Immobiliser Control Unit
- Block Diagram
- How to Program the Table 7, F7:PROGRAMMING Engine Type
- Components
- How to Program the Table 7, F7:PROGRAMMING Mechanical Key Number
- Control Unit, Part and Catalogue Numbers
- How to Program the Table 7, F7:PROGRAMMING Vehicle Ident. No.
- Abbreviations / Definitions
- How to Program the Table 7, F7:PROGRAMMING Fuel Cutoff Solenoid Valve
- How to Program the Table 7, F7:PROGRAMMING Engine Control Unit
- Diagnosis Main Check
- Table, Engine Control Units with Immobiliser Function (Petrol Engines)
- How to Connect the Diagnostic Tester
- F2:Trouble Code Trouble Code 11 Transponder Key Problem
- Trouble Code Table, Engine Control Units
- F2:Trouble Code Trouble Code 12 Wrong Transponder Key
- F2:Trouble Code Trouble Code 13 Immobiliser Not Programmed
- Terminal Assignment,wiring Harness Plug, Immo. Control Unit K117, 9-pin
- F2:Trouble Code Trouble Code 14 No Transp. Key Programmed
- Terminal Assignment, Diagnostic Plug Xd, 16-pin
- F2:Trouble Code Trouble Code 15 Vehicle Speed Signal Voltage Low
- Terminal Assignment, Diagnostic Plug X13, 10-pin
- F2:Trouble Code Trouble Code 16 Vehicle Speed Signal Voltage High
- F2:Trouble Code Trouble Code 17 No Engine Request Received
- F2:Trouble Code Trouble Code 18 Engine Check Light Circuit
- F2:Trouble Code Trouble Code 19 Anti Theft Sig. Signal Voltage Low
- Terminal Assignment, Simtec Control Unit (C18XE, C18XEL, X20XEV) (Excerpt)
- F2:Trouble Code Trouble Code 20 Anti Theft Sig. Signal Voltage High
- Terminal Assignment, Motronic Control Units
- F2:Trouble Code Trouble Code 21 Immo. Relay Voltage Low
- Terminal Assignment, Wiring Harness Plug, Dde 2.1 Control Unit (25DT)
- F2:Trouble Code Trouble Code 22 Immo. Relay Voltage High
- Circuit Diagram (Excerpt from Overall Circuit Diagram)
- F2:Trouble Code Trouble Code 55 Replace ECU
- Time Allowance
- F0:Data List Test Step T01 Ignition Status
- F0:Data List Test Step T02 Engine Request
- F0:Data List Test Step T03 Transponder Key
- F0:Data List Test Step T04 Transp. Key St.
- F0:Data List Test Step T05 Transp.key 1 St.
- F0:Data List Test Step T06 Transp.key 2 St.
- F0:Data List Test Step T07 Transp.key 3 St.
- F0:Data List Test Step T08 Transp.key 4 St.
- F0:Data List Test Step T09 Transp.key 5 St.
- F0:Data List Test Step T10 Immobiliser Sig.
- F0:Data List Test Step T11 Diesel Cutoff S.
- F0:Data List Test Step T12 ENG. Check Light
- F0:Data List Test Step T13 VEH.speed Output
- F0:Data List Test Step T14 Vehicle Speed
- F0:Data List Test Step T15 Security Wait T.
- F0:Data List Test Step T16 IMMO. Relay
- F0:Data List Test Step T17 ANTI Theft Sig.
- F5:Actuator Test Test Step T01 IMMO. Relay
- F5:Actuator Test Test Step T02 Diesel Cut. S.
- F6:ADD.FUNCTIONS Test Step T01 MECH. Key-No.
- F6:ADD.FUNCTIONS Test Step T02 READ VIN
- F7:PROGRAMMING Test Step T01 Program Tp-Key
- F7:PROGRAMMING Test Step T02 Erase Tp-Key
- F7:PROGRAMMING Test Step T03 Immobilisation
- F7:PROGRAMMING Test Step T04 Engine Type
- F7:PROGRAMMING Test Step T05 MECH. Key-No.
- F7:PROGRAMMING Test Step T06 VEH. Ident. No.
- F7:PROGRAMMING Test Step T07 ANTI Theft W.
- F7:PROGRAMMING Test Step T08 Diesel Cut. S.
- C-011, No Communication Between Diagnostic Tester and Control Unit
- C-02, Control Unit Hardware and Software
- C-03, System Voltage Circuit
- C-04, Transponder Key Circuit
- C-05, Engine Request /Engine Telltale Circuit
- C-06, Immobiliser Signal Circuit/ Vehicle Speed Output Circuit
- C-07, Vehicle Speed Input Circuit
- C-08, Diesel Cutoff Valve Circuit
- C-09, Immobiliser Relay Circuit
- C-10, Anti-Theft Warning System Circuit
- Terminal Assignment, Diagnostic Plug
- Terminal Assignment,engine Control Units
- Programming Immobiliser
- Part Locations in Vehicle
- Circuit Diagram for Engines with Engine Management System
- Table, Engine Control Units with Immobiliser Function
- Form Sheet for Immobiliser
- Immobiliser with Transponder
- Illustration - Location in Vehicle
- Function
- Function - Car Pass
- Transponder Key
- Control Unit
- Security Code
- How to Program the Security Code
- Security Code, Enter
- Loss of Transponder Key
- Transponder Code, Erase
- How to Program the Transponder Code
- How to Replace the Immobiliser Control Unit
- New Immobiliser Control Unit, Activate
- Circuit Diagram
- Terminal Assignment, Wiring Harness Plug for Immobiliser Control Unit, 9-pin
- Trouble Code Table; Immobiliser Control Unit
- Immobiliser - Introduction
- Immobiliser - Diagnosis
- Immobiliser - Read Trouble Code
- Immobiliser - Check Data List Parameters
- Immobiliser - Carry Out Actuator Tests
- Immobiliser - Carry Out Control Tests
- Immobiliser - Snapshot Mode
- Immobiliser - Final System Test
- Immobiliser - General Safety Measures and Repair Instructions
- Survey of Vehicle
- F2:Trouble Code Table - Trouble Code 11 Transponder Key Problem
- F2:Trouble Code Table - Trouble Code 12 Wrong Transponder Key
- F2:Trouble Code Table - Trouble Code 13 Immobiliser Not Programmed
- F2:Trouble Code Table - Trouble Code 14 No Transp. Key Programmed
- F2:Trouble Code Table - Trouble Code 15 Vehicle Speed Signal Voltage Low
- F2:Trouble Code Table - Trouble Code 16 Vehicle Speed Signal Voltage High
- F2:Trouble Code Table - Trouble Code 17 No Engine Request Received
- F2:Trouble Code Table - Trouble Code 18 Engine Check Light Circuit
- F2:Trouble Code Table - Trouble Code 19 Immo. Check Light Voltage Low
- F2:Trouble Code Table - Trouble Code 20 Immo. Check Light Voltage High
- F2:Trouble Code Table - Trouble Code 21 Immo. Relay Voltage Low
- F2:Trouble Code Table - Trouble Code 22 Immo. Relay Voltage High
- F2:Trouble Code Table - Trouble Code 55 Replace ECU
- F0:Data List - Test Step 06 Veh. Speed Output
- F0:Data List - Test Step 09 Transp. Key 1 St.
- F0:Data List - Test Step 10 Transp. Key 2 St.
- F0:Data List - Test Step 11 Transp. Key 3 St.
- F0:Data List - Test Step 12 Transp. Key 4 St.
- F0:Data List - Test Step 13 Transp. Key 5 St.
- F0:Data List - Test Step 16 Immo. Check Light
- F5:actuator Test Immo. Check Light
- F0:actuator Test Immo. Relay
- F6:miscellaneous Tests Mechanical Key-No.
- F6:miscellaneous Tests Vehicle Ident. No.
- F7:programming Note
- F7:programming Program Tp-Key
- F7:programming Erase Tp-Key
- F7:programming Immobiliser
- F7:programming Engine Type
- F7:programming Mechanical Key-No.
- F7:programming Vehicle Ident. No.
- F7:programming Diesel Cut. S.
- How to Remove and Install the Immobiliser Control Unit
- ABS
- Accessories
- Additional Lighting
- Air Conditioning
- Airbag
- Antenna
- Anti-Theft Warning System-M
- Automatic Transmission Front Wheel Drive
- Battery
- Board Computer
- Body Equipment
- Brake Hydraulics, Brake Lines
- Brakes
- Car Level Control
- Central Door Locking System
- Check Control
- Clutch
- Clutch and Transmission
- Cooling System
- Corrosion Protection
- Did (Dual Info Display)
- Distributor Transmission Four Wheel Drive
- DOHC Petrol Engine
- Electrical Equipment and Instruments
- Electrical Window Winders
- Electronic Traction Control
- Engine and Engine Aggregates
- Engine Electrics
- Exhaust System
- Fittings, Hinges, Locks
- Frame
- Front End
- Front Wheel Brake
- Front Wheel Suspension
- Front Wheel Suspension, Wheels and Tyres
- Fuel and Exhaust System
- Fuel Injection Systems
- Fuel System
- Fuse Box
- General Vehicle Information
- Glass, Window Guides, Window Winders
- Headlamps, Lamps and Horn
- Heating, Ventilation
- Immobiliser
- Instruments, Telltales
- Maintenance, Body and Chassis Sheet Metal Parts, Frame
- Manual Transmission Front Wheel Drive
- OHC Petrol Engine
- Other Accessories
- Outside Rear View Mirror
- Paint
- Painting Repair Operations
- Painting Repair System
- Power Steering
- Radiator Grille
- Radio
- Radio Interference Suppression
- Rear Axle and Rear Wheel Suspension
- Rear Axle Four Wheel Drive
- Rear Axle Front Wheel Drive
- Rear Wheel Brake
- Seat Heating Systems
- Seats, Upholstery, Inner Trim Panels
- Secondary Air Injection
- Service Brake, Parking Brake
- Sheet Metal Parts (Bolted)
- Sheet Metal Parts (Cement and Seal)
- Sheet Metal Parts (Welded)
- Sliding Roof
- Steering Damper
- Steering Gear
- Steering Linkage
- Steering Wheel - Steering Column
- Switches, Control Unit, Relays, Ignition Lock
- Trailer Hitch
- Trim Panels, Radiator Grille, Spoiler
- Trim Strips, Lettering, Coverings
- Turbo-Charging
- Wheels and Tyres
- Windscreen Wash/wipe System, Heated Screen
- Wiring Harnesses