Hydraulic Pump, Replace
Illustration shows ancillary drive unit removed from engine for clarity.
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Engine undershield.
Heater air intake ducting - release spring clips.
V-belt - see corresponding operation.
Hose connections - union and clip, fluid escapes, place container.
Pump from mounting - bolts.
Screw from pulley - left-hand thread.
| Pulley from pump - use suitable press. | |||
|---|---|---|---|
| .P. T1149.tif | 9 | 16 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Pulley to pump - left-hand thread on screw; check dimension A 50.5 mm/1.99 in.
Pump to mounting - bolts.
Hose connections - union and clips.
V-belt - see corresponding operation.
Bleed hydraulic system - see corresponding operation.
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
For leaks with engine running and actuating steering.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Heater air intake ducting - spring clips.
| Engine undershield. | |||
|---|---|---|---|
| .P. T1417.tif | 9 | 7,5 | tiff;; |