Special Service Tools
KM-412 Engine Assembly Stand
To hold removed engine.
KM-412-19 Adapter
To hold engine in conjunction with KM-412.
KM-652 Flywheel Holder
To lock flywheel.
KM-6020 Adapter
To measure cylinder compression in conjunction with compression tester.
KM-6028 (Mot.990-02) Installer
To install crankshaft front oil seal.
KM-6029 (Mot.991-01) Installer
To install crankshaft rear oil seal.
| .P. T7227.tif | 10 | 14 | tiff;; |
KM-6030 (Mot.988-02) Installer
To install camshaft oil seal.
KM-6031 (Mot.1054) Positioning Pin
To position Number 1 cylinder at TDC.
KM-6032 (Mot.1200-01) Locking Tool
To lock injection pump pulley.
KM-6033 (Mot.1079-01) Adapter
To check injection pump timing in conjunction with dial gauge.
KM-6034 (Mot.1359) Socket
To slacken and tighten nut of injection pump coupling.
KM-6035 (Mot.1358-01) Adjusting Wrench
To adjust injection pump timing.
| .P. T7234.tif | 10 | 14 | tiff;; |
KM-6036 (Mot.1357) Extractor
To extract pinion from injector pump.
KM-8079 Remover/Installer
To remove and install injector.
| .P. T9077.tif | 10 | 14 | tiff;; |