Cooling System, Check for Leaks
Check coolant level is up to MAX mark on expansion tank.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Pressure tester.
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Cooling system for leaks - apply pressure of approx. 200 kPa/2 bar.
| Complete water system must remain free of leaks under pressure for at least 3 minutes. | |||
|---|---|---|---|
| .P. T3203.tif | 9 | 7,5 | tiff;; |