The figures are valid for vehicles with a full fuel tank and not carrying any loads on the front seats. The difference in height between the left and right-hand sides of the vehicle, when measured from the contact surface to the wheel arch (vertically through the wheel centre point), must not exceed 15 mm.
| Agila-B | Difference right/left maximum | |
|---|---|---|
| Front wheel adjustment | ||
| Camber 3) | 0° ±6' | - |
| Caster 3) | 5° 12' ±2° | - |
| Toe-in 1) | 0° 6' ±6' | - |
| Toe-in variation with outer wheel deflection of 33° 18' 2) | 12° 7.5' | - |
| Inner wheel deflection with outer wheel deflection of 33° 18' | 39° 06' | - |
| Rear wheel adjustment | ||
| Camber 3) | -1° 00' ±1° | - |
| Toe-in 1) 3) | 0° 10' 8''±10' 8'' | - |
1
) Positive values = toe-in, negative values = toe-out
2
) Outer wheel deflection plus toe-in variation = inner wheel deflection
3
) The specified values are set during production. Adjustment in Service is not possible