Reverse Lamp Switch Replacement Opel Agila B

Remove

1. 1. Disconnect harness connector (3) from mass air flow meter (5)
2. 2. Release cover (2) from air cleaner assembly • Release 4x screw
3. 3. Remove air cleaner element from air cleaner assembly
4. 4. Release outlet hose (1) to coolant expansion tank from air cleaner assembly • Release clip
5. 5. Release harness for mass air flow meter from air cleaner assembly • Release clip
6. 6. Remove air cleaner assembly from battery tray and upper front panel • Remove 2x bolt (4) • Pull up to release 2x locator from battery tray

7. 7. Disconnect harness connector (1) from reverse lamp switch (2)
8. 8. Remove reverse lamp switch with sealing washer from transmission • Remove O ring from reverse lamp switch

Install

9. 9. Install new O ring to new reverse lamp switch (2) • Apply suitable lubricant to O ring, then slide on
10. 10. Install reverse lamp switch with sealing washer to transmission • Secure reverse lamp switch to 23 Nm
11. 11. Connect harness connector (1) to reverse lamp switch

12. 12. Install air cleaner assembly to battery tray and upper front panel • Push down to secure 2x locator to battery tray • Install 2x bolt (4)
13. 13. Secure harness for mass air flow meter to air cleaner assembly • Secure clip
14. 14. Secure outlet hose (1) to coolant expansion tank to air cleaner assembly • Secure clip
15. 15. Install air cleaner element to air cleaner assembly

Note. Before installing the air cleaner element, remove all debris from the air cleaner assembly.

16. 16. Secure cover (2) to air cleaner assembly • Secure 4x screw
17. 17. Connect harness connector (3) to mass air flow meter (5)