Horn Replacement Opel Agila B

Remove

1. 1. Raise vehicle
2. 2. Release 2x protective panelling from front panelling • Remove 4x clip (1)

3. 3. Release front panelling from lower front body panel • Remove 3x bolt (1)

4. 4. Lower vehicle
5. 5. Release front panelling from 2x front wing • Remove 2x screw (1)
6. 6. Release front panelling from upper front body panel • Remove 2x clip (3), 4x bolt (2)

7. 7. Remove front panelling from vehicle • Release front panelling from 2x side bracket (1) – Pull off • Disconnect 2x harness connector from 2x front fog lamp (if installed)

Note. 2x technician are required.

8. 8. Remove horn (1) from upper front body panel • Disconnect harness connector (2) • Remove bolt

Install

9. 9. Install new horn (1) to upper front body panel • Install bolt • Connect harness connector (2)

10. 10. Install front panelling to vehicle • Connect 2x harness connector to 2x front fog lamp (if installed) • Secure front panelling to 2x side bracket (1) – Push on

Note. 2x technician are required.

11. 11. Secure front panelling to upper front body panel • Install 4x bolt (2), 2x clip (3)
12. 12. Secure front panelling to 2x front wing • Install 2x screw (1)

13. 13. Raise vehicle
14. 14. Secure front panelling to lower front body panel • Install 3x bolt (1)

15. 15. Secure 2x protective panelling to front panelling • Install 4x clip (1)

16. 16. Lower vehicle