Tie Rods, Replace
Remove corresponding tie-rod end from tie rod - see operation "Tie-Rod End, Remove and Install".
Remove corresponding folding cover on steering gear - see operation "Folding Cover on Steering Gear, Replace".
Remove tie rod from rack with KM-6004-1 (SW32) (1).
Attach new tie rod with KM-6004-1 (SW32) to rack - tightening torque 85 Nm / 63 lbf. ft. Caulk retaining plate in groove on rack (1).
Install folding cover on steering gear - see operation "Folding Cover on Steering Gear, Replace".
Reinstall corresponding to Tie Rod End - see operation "Tie Rod End Remove and Install".
Check straight-ahead position, and adjust if necessary - see operation "Straight-ahead Position, Check and Adjust".
Check toe-in, adjust if necessary - see brochure "Chassis Alignment Values" for the respective model year.