TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Axle Shaft Nut | 185 (251) | |
| Ball Joint | ||
| To Control Arm (Replacement Bolt/Nut) | (1) | |
| To Steering Knuckle (Nut) | (2) 41 (56) | |
| Brake Caliper Bolt | 38 (52) | |
| Hub & Bearing Assembly Bolt | 70 (95) | |
| Lower Control Arm-To-Frame Bolt | ||
| Front | 89 (120) | |
| Rear | 125 (170) | |
| Stabilizer Bar | ||
| To Control Arm (Nut) | 15 (20) | |
| To Crossmember (Bolt) | 22 (30) | |
| Strut Assembly | ||
| To Steering Knuckle (Bolt) | 133 (180) | |
| To Upper Body Mount (Nut) | 18 (24) | |
| Rod (Shaft) Nut | 52 (70) | |
| Suspension Support Bolt | 89 (120) | |
| Tie Rod End Nut | (2) 44 (60) | |
| Wheel Lug Nut | 100 (136) | |
| (1) Tighten to specification in service ball joint kit. (2) Tighten nut to specification, then tighten nut further only as far as necessary to align cotter pin hole. | ||
| (1) | Tighten to specification in service ball joint kit. |
| (2) | Tighten nut to specification, then tighten nut further only as far as necessary to align cotter pin hole. |
TORQUE SPECIFICATIONS