URETHANE FOAM APPLICATIONS
Use commercially available spray foam for sealant (foam material) repair of material used on vehicle. Read instructions on product for fill procedures.
Scheme 125
Scheme 126
- Fill procedures after installation of service part. Remove foam material remaining on vehicle side. Clean area in which foam was removed. Install service part. Insert nozzle into hole near fill area and fill foam material or fill in enough to close gap with the service part.
- Fill procedures before installation of service part. Remove foam material remaining on vehicle side. Clean area in which foam was removed. Fill foam material on wheelhouse outer side. NOTE: Fill in enough to close gap with service part while avoiding flange area. Install service part. NOTE: Refer to label for information on working times.
Hatchback
Scheme 127
Sedan
