Removal and Installation
The driver seat control unit is part of the driver seat. Remove the driver seat, then the driver seat control unit. Refer to " REMOVAL AND INSTALLATION ".
| CAUTION | When removing and installing, use shop cloths to protect parts from damage. |
REMOVAL
- Disconnect the battery negative terminal.
- Remove the instrument driver lower panel. Refer to " «REMOVAL AND INSTALLATION»(ref-396292-S36643160102011050400000) ".
- Remove the lower knee protector.
- Remove the screw from the automatic drive positioner control unit (1).
- Remove automatic drive positioner control unit (1) from bracket and disconnect electrical connectors.
Scheme 112
INSTALLATION
Installation is in the reverse order of removal.
| CAUTION | Clamp the harness in position. |
Note. After installing the automatic drive positioner control unit, perform additional service when disconnecting battery negative terminal. Refer to " SPECIAL REPAIR REQUIREMENT ".
Refer to " REMOVAL AND INSTALLATION " for seat memory switch.
The door mirror remote control switch is part of the power window switch assembly. Refer to " REMOVAL AND INSTALLATION " for door mirror remote control switch.
Refer to " REMOVAL AND INSTALLATION " for accelerator pedal and " REMOVAL AND INSTALLATION " for brake pedal when removing pedal adjusting motors.