Home/Nissan/Titan/Nissan Titan I (2003-2006)/Repair manual/Charging System/Generators & Regulators: Specifications
Contents Wiring diagrams Section: Charging System All sections

Generators & Regulators: Specifications Nissan Titan I

GENERATOR SPECIFICATIONS

ApplicationSpecification
Generator ModelLR1130-701, HITACHI
Nominal Rating12 Volts, 130 Amps
Ground PolarityNegative
Minimum RPM Under No Load (With 13.5 Volts Applied)1200 RPM
Hot Output Current (With 13.5 Volts Applied)
At 1800 RPM78 Amps
At 2500 RPM108 Amps
At 5000 RPM130 Amps
Regulated Output Voltage14.1-14.7 Volts @ 25°C
Minimum Brush Length.24 in. (6.00 mm)
Brush Spring Pressure3.60-12.34 ozs. (1.00-3.43 N)
Slip Ring Minimum Outer Diameter1.024 in. (26.00 mm)
Rotor (Field Coil) Resistance2.1 Ohms

GENERATOR SPECIFICATIONS

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Generator Lower Bracket Bolt16 (22)
Generator Lower Mounting Bolt16 (22)
Generator Upper Mounting Bolt48 (65)
Generator Pulley Nut53 (71)
INCH Lbs. (N.m)
"B" Terminal Connector Nut80-97 (9-11)

TORQUE SPECIFICATIONS