Home ReviewsRefund
Home/Nissan/Titan/Nissan Titan I (2003-2006)/Repair manual/Body, Cab Control Systems/Body Control Module: Overview
Contents Wiring diagrams Section: Body, Cab Control Systems All sections

Body Control Module: Overview Nissan Titan I

Body, Cab Control Systems 2 illustrations

SYSTEM DESCRIPTION

  1. BCM (Body Control Module) controls the operation of various electrical units installed on the vehicle.

CAN COMMUNICATION SYSTEM DESCRIPTION

Refer to CAN COMMUNICATION .

Scheme 1

Scheme 1: SCHEMATIC
Scheme 1: SCHEMATIC

Scheme 2

Scheme 2
Scheme 2

Description

CONFIGURATION has two functions as follows

  1. READ CONFIGURATION is the function to confirm vehicle configuration of current BCM.
  2. WRITE CONFIGURATION is the function to write vehicle configuration on BCM.
CAUTIONWhen replacing BCM, you must perform WRITE CONFIGURATION with CONSULT-II. Complete the procedure of WRITE CONFIGURATION in order. If you set incorrect WRITE CONFIGURATION, incidents will occur. Configuration is different for each vehicle model. Confirm configuration of each vehicle model.

More articles — Body Control Module