Contents Section: Traction Control Disable All sections

Traction Control Disable Procedures Nissan Stanza III

* PLEASE READ THIS FIRST *

Placing a non-compatible vehicle on a single-axle dynamometer could result in a safety hazard to technicians and damage to vehicle. Vehicles which use All-Wheel Drive (AWD) or traction control may not be clearly marked. Use common sense and take all necessary precautions when placing any vehicle on the dynamometer. Determine between full-time 4WD and All-Wheel Drive (AWD) for testing purposes. The following tables include information related to full-time 4WD and AWD vehicles, and how to disable the traction control system (if disengageable).

WARNINGDO NOT operate vehicle on a 2-wheel dynamometer if the DO NOT TEST column is marked.
ApplicationFWDRWDPart Time 4WDFull Time 4WDAWDTCSDo Not Test
350Z
2003-09XX (4)
370Z
2009-14XX (4)
Altima
2002-14XX (4)
Armada
2004-14 (4WD)X (3)X (5)X (1)
2004-14 (RWD)XX (5)
Axxess
1990XX
Cube
2009-14XX (4)
Frontier
1997-03XX (2)
2004-06XX (3)X (4)
2007-14XX (6)
GT-R
2009-14XX
Juke
2013-14 (AWD)XX
2013-14 (FWD)XX (4)
Maxima
1999-14XX (4)
Murano
2003-14 (AWD)XX
2003-14 (FWD)XX (4)
NV 200
2013-14XX (4)
NV (1500/ 2500/ 3500)
2012-14XX (4)
Pathfinder
1986-02 (w/o All Mode 4WD)XX (2)
2001-02 (All Mode 4WD)XX (3)X (1)
2003-14 (RWD)XX (5)
2003-13 (w/All-Mode 4WD)XX (3)X (5)X (1)
2003-12 (w/o All-Mode 4WD)XX (2)X (5)
2014 (4WD)X (7)X (5)
Pickup
1980-96 (4WD)XX (2)
Quest
2004-14XX (4)
Rogue
2008-14 (AWD)XX
2008-14 (FWD)XX (5)
Sentra Wagon
1988-90 (AWD)XX
Sentra
2010-14XX (4)
Stanza Wagon
1985-88 AWDXX
Titan
2004-14 (RWD)XX (5)
2004-06 (4WD)X (3)X (5)
2007-14XX (6)
Versa / Note
2007-09X
2010-14XX (4)
Xterra
2000-03XX (2)
2004XX (2)X (5)
2005-06XX (3)X (5)
2007-14XX (6)
(1) Automatic 4WD. Cannot be tested on a 2-wheel dynamometer. (2) Shift transfer case to 2H. (3) Place 4WD switch located on dash into 2WD position. Indicator light will indicate 2WD mode. (4) Press TCS OFF or VDC OFF switch on left end of dash. The indicator light will illuminate when system is disabled. (5) Press VDC OFF switch in the center instrument area. VDC OFF indicator light will illuminate when system is disabled. (6) Although vehicle can be shifted into 2WD, Nissan warns against testing on a 2-wheel dynamometer. (7) Intelligent 4WD. Turn the 4WD mode switch to the 2WD position. The Two-Wheel Drive (2WD) indicator light in the vehicle information display illuminates.
(1)Automatic 4WD. Cannot be tested on a 2-wheel dynamometer.
(2)Shift transfer case to 2H.
(3)Place 4WD switch located on dash into 2WD position. Indicator light will indicate 2WD mode.
(4)Press TCS OFF or VDC OFF switch on left end of dash. The indicator light will illuminate when system is disabled.
(5)Press VDC OFF switch in the center instrument area. VDC OFF indicator light will illuminate when system is disabled.
(6)Although vehicle can be shifted into 2WD, Nissan warns against testing on a 2-wheel dynamometer.
(7)Intelligent 4WD. Turn the 4WD mode switch to the 2WD position. The Two-Wheel Drive (2WD) indicator light in the vehicle information display illuminates.

NISSAN