Repair manual
Nissan Stanza II Repair Manual
Step-by-step repair and maintenance instructions for the Nissan Stanza II (1986–1986): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
- DESCRIPTION
- ELECTRONIC CONTROL UNIT (ECU) OPERATION
- COMPONENT LOCATION
- AIRFLOW METER
- CRANKSHAFT ANGLE SENSOR
- CYLINDER HEAD TEMPERATURE SENSOR
- AIR TEMPERATURE SENSOR
- DETONATION (KNOCK) SENSOR
- VEHICLE SPEED SENSOR (VSS)
- EXHAUST GAS OXYGEN SENSOR (O2 SENSOR)
- FUEL TEMPERATURE SENSOR
- THROTTLE VALVE SWITCH (TVS)
- VACUUM CONTROL VALVE
- POWER STEERING OIL PRESSURE SWITCH
- FUEL INJECTION CONTROL
- IGNITION TIMING CONTROL
- DETONATION FEEDBACK OPERATION
- IDLE SPEED CONTROL (ISC)
- EXHAUST GAS RECIRCULATION (EGR) CONTROL
- FUEL PUMP CONTROL
- AIR INJECTION VALVE (AIV) CONTROL
- FUEL PRESSURE REGULATOR CONTROL
- AIR REGULATOR CONTROL
- AUXILIARY AIR CONTROL VALVE (AAC)
- AIRFLOW METER SELF-CLEANING CONTROL
- SPARK PLUG SWITCHING CONTROL
- MIXTURE HEATER CONTROL
- FUEL PUMP
- INJECTOR MALFUNCTIONING
- MODE 1: MIXTURE RATIO FEEDBACK CONTROL MONITOR "A"
- MODE 2: MIXTURE RATIO FEEDBACK CONTROL MONITOR "B"
- MODE 3: SELF-DIAGNOSIS
- MODE 4: SWITCHES ON-OFF DIAGNOSIS
- MODE 5: REAL TIME DIAGNOSIS
- TEST PRELIMINARY CHECKS
- STARTING & CHANGING MODES OF SELF-DIAGNOSIS
- MEMORY ERASE
- TESTING CAUTIONS
- Preparation
- MEASUREMENT VOLTAGE OR RESISTANCE OF ECU — Part 1
- MEASUREMENT VOLTAGE OR RESISTANCE OF ECU — Part 2
- Operation
- Fan Motor
- Fan Motor Timer Unit
- Water Temperature Switch