Contents Wiring diagrams Section: Engine Control Systems All sections

Accelerator Control System: Other Nissan Sentra B16

Engine Control Systems 2 illustrations

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. Information necessary to service the system safely is included in SUPPLEMENTAL RESTRAINT SYSTEM and SEAT BELTS article.

WARNINGTo avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see SUPPLEMENTAL RESTRAINT SYSTEM . Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this article. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.
Scheme 1: Identifying Accelerator Control System Components With Torque Specification

PEDAL TRAVEL

ACCELERATOR PEDAL SPECIFICATIONS Accelerator pedal - total travel "A" 50.5 mm (1.99 in)

Scheme 2

Scheme 2: PEDAL TRAVEL