GENERATOR SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Generator Model | LR180-769, HITACHI | |
| Nominal Rating | 12 Volts, 80 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 23 Amps | |
| At 2500 RPM | 66 Amps | |
| At 5000 RPM | 79 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.00 mm) | |
| Brush Spring Pressure | 3.60-12.34 ozs. (1.000-3.432 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |
| Rotor (Field Coil) Resistance | 2.67 Ohms | |
GENERATOR SPECIFICATIONS (1.8L)
| Application | Specification | |
|---|---|---|
| Generator Model | LR1100-734, HITACHI | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 950 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 35 Amps | |
| At 2500 RPM | 83 Amps | |
| At 5000 RPM | 95 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.00 mm) | |
| Brush Spring Pressure | 3.60-12.34 ozs. (1.000-3.432 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |
| Rotor (Field Coil) Resistance | 2.31 Ohms | |
GENERATOR SPECIFICATIONS (2.5L)
TORQUE SPECIFICATIONS
| Application | Ft. Lbs (N.m) | |
|---|---|---|
| 1.8L | ||
| A/C Compressor Mounting Bolt | 33-44 (45-60) | |
| Generator Bracket Mounting Bolt | 13-17 (17-23) | |
| Generator Lower Mounting Bolt | 25-34 (34-46) | |
| Generator Upper Mounting Bolt | 13-17 (17-23) | |
| 2.5L | ||
| Generator Lower Mounting Bolt | 32-38 (44-52) | |
| Generator Upper Mounting Bolt | 18-23 (24-31) | |
| Generator Pulley Nut | 36-47 (49-64) | |
| INCH Lbs. (N.m) | ||
| Terminal Connector Nut | 71-97 (8-11) | |
TORQUE SPECIFICATIONS