Home ReviewsRefund
Home/Nissan/Rogue/Nissan Rogue II (2013-2016)/Repair manual/Exterior Lighting System (LED)/Component Function Check
Contents Wiring diagrams Section: Exterior Lighting System (LED) All sections

Component Function Check Nissan Rogue II

Exterior Lighting System (LED) ~223 words

Component Function Check

  1. CHECK OPTICAL SENSOR SIGNAL BY CONSULT CONSULT DATA MONITOR Turn power switch ON. Select "OPTICAL SENSOR" of BCM (HEADLAMP) data monitor item. Turn lighting switch AUTO. With the optical sensor illuminating, check the monitor status. *: Illuminates the optical sensor. The value may be less than the standard value if brightness is weak. Monitor item Condition Voltage (Approx.) OPTICAL SENSOR Optical sensor When illuminating 3.1 V or more () When shutting off light 0.6 V or less Is the inspection result normal? YES: Optical sensor is normal. NO: Refer to " «DIAGNOSIS PROCEDURE»(ref-616745-S35895142372014051900000) ".
  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT CONSULT DATA MONITOR Turn power switch ON. Select "HAZARD SW" of BCM (FLASHER) data monitor item. With operating the hazard switch, check the monitor status. Monitor item Condition Monitor status HAZARD SW Hazard switch ON On OFF Off Is the inspection result normal? YES: Hazard switch circuit is normal. NO: Refer to " «DIAGNOSIS PROCEDURE»(ref-616745-S09076156022014051900000) ".
  1. CHECK TURN SIGNAL LAMP CONSULT Select FLASHER of BCM (FLASHER) active test item. While operating the test items, check that the turn signal lamp blinks. LH: Turn signal lamps (LH) ON RH: Turn signal lamps (RH) ON Off: Turn signal lamps OFF Is the inspection result normal? YES: Turn signal lamp circuit is normal. NO: Refer to " «DIAGNOSIS PROCEDURE»(ref-616745-S24402928372014051900000) ".