APPLICATION ITEM
CONSULT can display each diagnostic item using the diagnostic test modes as follows.
| Mode | Function description |
|---|
| ECU identification | Parts number of chassis control module can be read. |
| Self Diagnostic Result | Self-diagnostic results and freeze frame data can be read and erased quickly. (1) |
| Data Monitor | Input/Output data in chassis control module can be read. |
| Active Test | Send the drive signal from CONSULT to the actuator. The operation check can be performed. |
| Re/programming, Configuration | Read and save the vehicle specification (TYPE ID). Write the vehicle specification (TYPE ID) when replacing Chassis Control Module. |
| (1) The following diagnosis information is erased by erasing. DTC Freeze frame data (FFD) |
| (1) | The following diagnosis information is erased by erasing. |
