Home ReviewsRefund
Home/Nissan/Rogue/Nissan Rogue I (2007-2010)/Repair manual/Engine Control Systems/Accelerator Control System: Diagnosis
Contents Wiring diagrams Section: Engine Control Systems All sections

Accelerator Control System: Diagnosis Nissan Rogue I

Engine Control Systems

INSPECTION AFTER INSTALLATION

  1. Check that accelerator pedal moves smoothly within the whole operation range when it is depressed fully and released.
  2. Check that accelerator pedal returns securely to the fully released position.
  3. For the electrical inspection of accelerator pedal position sensor. Refer to " «DESCRIPTION»(/nissan/rogue/i-2007-2010/remont/engine-control-systems/#engine-control-system-for-california) ".
CAUTIONWhen harness connector of accelerator pedal position sensor is disconnected, perform "ACCELEATOR PEDAL RELEASED POSITION LEARNING". Refer to " ACCELERATOR PEDAL RELEASED POSITION LEARNING : DESCRIPTION " (for California), " ACCELERATOR PEDAL RELEASED POSITION LEARNING : DESCRIPTION " (for Mexico) or " ACCELERATOR PEDAL RELEASED POSITION LEARNING : DESCRIPTION " (Except for California and Mexico).

More articles — Accelerator Control System