ID CODE ENTRY PROCEDURE
Key fob ID setup WITH CONSULT-III
Refer to " MULTI-REMOTE ENT : CONSULT-III Function (BCM - MULTI-REMOTE ENT) ".
| CAUTION | If CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication. |
Note. If a key fob is lost, the ID code of the lost key fob must be erased to prevent unauthorized use. When the ID code of a lost key fob is not known, all controller ID codes should be erased. After all ID codes are erased, the ID codes of all remaining and/or new key fobs must be re-registered.
