WARNING CHIME OPERATION CONDITIONS
If all of the following conditions are fulfilled.
| Operation conditions | |
|---|---|
| Ignition switch | OFF or ACC position |
| Combination switch (Lighting switch) | 1st or 2nd position |
| Driver side door | Open [front door switch (driver side) ON] |
Warning chime sounds during 2 seconds when the ignition switch is in LOCK, OFF or ACC position, if all of below operation conditions is met.
| Operation conditions | |
|---|---|
| Ignition switch | ON position |
| Combination switch (Lighting switch) | AUTO position and front fog lamp switch ON position |
WARNING OPERATION CONDITIONS
If all of the following conditions are fulfilled.
| Operation conditions | |
|---|---|
| Ignition switch | ON |
| Driver seat belt | Unfastened [seat belt buckle switch (driver side) ON] |
If all of the following conditions are fulfilled.
| Operation conditions | |
|---|---|
| Ignition switch | ON |
| Parking brake | During the operation (parking brake switch ON) |
| Vehicle speed | Approximately 7 km/h (4.3 MPH) or more |
Description
Light reminder warning chime does not sound even though headlamp is illuminated.
- The parking brake warning buzzer sounds continuously during vehicle travel though the parking brake is released.
- The parking brake warning buzzer does not sound at all even though driving the vehicle with the parking brake applied.
- Seat belt warning chime does not sound.
- Seat belt warning chime sounds continuously.
See also:
• DIAGNOSIS PROCEDURE