WHEEL TIGHTENING
All wheels are tightened to 72-87 ft. lbs. (98-118 N.m). If wheels are equipped with locking type lug nuts ALWAYS position the keyed nut opposite the valve stem.
| CAUTION | DO NOT use a power impact wrench on a lug nut key. Ensure key is held square to the nut. If key is on an angle, damage to the key and anti-theft lug nut may occur. |
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section. |
Vehicle is equipped with a 60 amp. maintenance-free battery. Replacement battery should be of the same amperage and group as the original.