Home ReviewsRefund
Home/Nissan/Pathfinder/Nissan Pathfinder III рестайлинг (2010-2014)/Repair manual/Seats/Automatic Drive Positioner: Removal & Installation
Contents Section: Seats All sections

Automatic Drive Positioner: Removal & Installation Nissan Pathfinder III рестайлинг

Seats 1 illustration ~182 words

Removal and Installation

Refer to " REMOVAL AND INSTALLATION " for removal and installation of driver seat control unit from driver seat.

REMOVAL

CAUTIONWhen removing and installing, use shop cloths to protect parts from damage.

Scheme 148

Scheme 148
Scheme 148
  1. Remove the battery negative terminal. Refer to " «REMOVAL AND INSTALLATION»(ref-553889-S32127243522013051800000) ".
  2. Remove the instrument lower panel LH using a suitable tool. Refer to " «REMOVAL AND INSTALLATION»(ref-519812-S25020407392012122900000) ".
  3. Remove the automatic drive positioner control unit screw (A).
  4. Separate automatic drive positioner control unit (1) from bracket and disconnect electrical connectors.

INSTALLATION

Installation is in the reverse order of removal.

CAUTIONClamp the harness in position.

Note. After installing the automatic drive positioner control unit, perform additional service when disconnecting battery negative terminal. Refer to " SPECIAL REPAIR REQUIREMENT ".

Refer to " REMOVAL AND INSTALLATION " for removal and installation of seat memory switch from the door finisher.

Refer to " EXPLODED VIEW " for removal and installation of door mirror remote control switch from instrument lower panel LH.

The pedal adjusting motor is part of the accelerator pedal. Replace the pedal adjusting motor and accelerator pedal as an assembly. Refer to " EXPLODED VIEW ".

More articles — Automatic Drive Positioner