WORK SUPPORT
| Support Item | Setting | Description | |
|---|---|---|---|
| BATTERY SAVER SET | On (1) | Exterior lamp battery saver function ON. | |
| Off | Exterior lamp battery saver function OFF. | ||
| ILL DELAY SET | MODE 8 | 180 sec. | Sets delay timer function operation time (All doors closed). |
| MODE 7 | 150 sec. | ||
| MODE 6 | 120 sec. | ||
| MODE 4 | 60 sec. | ||
| MODE 5 | 90 sec. | ||
| MODE 3 | 30 sec. | ||
| MODE 2 | OFF | ||
| MODE 1 (1) | 45 sec. | ||
| (1) Initial setting | |||
| (1) | Initial setting |
| Monitor Item [Unit] | Description |
|---|---|
| REQ SW-DR [On/Off] | Indicates condition of door request switch LH. |
| REQ SW-AS [On/Off] | Indicates condition of door request switch RH. |
| PUSH SW [On/Off] | Indicates condition of push-button ignition switch. |
| TURN SIGNAL R [On/Off] | Indicates condition of turn signal function of combination switch. |
| TURN SIGNAL L [On/Off] | |
| HAZARD SW [On/Off] | Indicates condition of hazard switch. |
| RKE-LOCK [On/Off] | Indicates condition of lock signal from Intelligent Key. |
| RKE-UNLOCK [On/Off] | Indicates condition of unlock signal from Intelligent Key. |
| RKE-PANIC [On/Off] | Indicates condition of panic alarm signal from Intelligent Key. |
| Support Item | Setting | Description |
|---|---|---|
| HAZARD ANSWER BACK | Lock/Unlock (1) | Hazard warning lamp activation when doors are locked or unlocked with Intelligent Key. |
| Unlock Only | Hazard warning lamp activation when doors are unlocked with Intelligent Key. | |
| Lock Only | Hazard warning lamp activation when doors are locked with Intelligent Key. | |
| Off | No hazard warning lamp activation when doors are locked or unlocked with Intelligent Key. | |
| (1) Initial setting | ||
| (1) | Initial setting |
| Monitor Item [Unit] | Description |
|---|---|
| FR WIPER HI [On/Off] | Indicates condition of wiper operation of combination switch. |
| FR WIPER LOW [On/Off] | |
| FR WASHER SW [On/Off] | |
| FR WIPER INT [On/Off] | |
| INT VOLUME [1 - 7] | Indicates condition of intermittent wiper operation of combination switch. |
| RR WIPER ON [On/Off] | Indicates condition of rear wiper operation of combination switch. |
| RR WIPER INT [On/Off] | |
| RR WASHER SW [On/Off] | |
| TURN SIGNAL R [On/Off] | Indicates condition of right turn signal operation of combination switch. |
| TURN SIGNAL L [On/Off] | Indicates condition of left turn signal operation of combination switch. |
| TAIL LAMP SW [On/Off] | Indicates condition of tail lamp switch operation of combination switch. |
| HI BEAM SW [On/Off] | Indicates condition of Hi beam switch operation of combination switch. |
| HEAD LAMP SW 1 [On/Off] | Indicates condition of head lamp switch 1 operation of combination switch. |
| HEAD LAMP SW 2 [On/Off] | Indicates condition of head lamp switch 2 operation of combination switch. |
| PASSING SW [On/Off] | Indicates condition of passing switch operation of combination switch. |
| FR FOG SW [On/Off] | Indicates condition of front fog lamp switch operation of combination switch. |
| Monitor Item [Unit] | Description |
|---|---|
| REQ SW-DR [On/Off] | Indicates condition of door request switch LH. |
| REQ SW-AS [On/Off] | Indicates condition of door request switch RH. |
| PUSH SW [On/Off] | Indicates condition push-button ignition switch. |
| UNLK SEN-DR [On/Off] | Indicates condition of door unlock sensor. |
| DOOR SW-DR [On/Off] | Indicates condition of front door switch LH. |
| DOOR SW-AS [On/Off] | Indicates condition of front door switch RH. |
| DOOR SW-RR [On/Off] | Indicates condition of rear door switch RH. |
| DOOR SW-RL [On/Off] | Indicates condition of rear door switch LH. |
| DOOR SW-BK [On/Off] | Indicates condition of back door switch. |
| CDL LOCK SW [On/Off] | Indicates condition of lock signal from door lock and unlock switch. |
| CDL UNLOCK SW [On/Off] | Indicates condition of unlock signal from door lock and unlock switch. |
| KEY CYL LK-SW [On/Off] | Indicates condition of lock signal from door key cylinder switch. |
| KEY CYL UN-SW [On/Off] | Indicates condition of unlock signal from door key cylinder switch. |
| RKE-LOCK [On/Off] | Indicates condition of lock signal from Intelligent Key. |
| RKE-UNLOCK [On/Off] | Indicates condition of unlock signal from Intelligent Key. |
| Support Item | Setting | Description | |
|---|---|---|---|
| BATTERY SAVER SET | ON (1) | Exterior lamp battery saver function ON. | |
| OFF | Exterior lamp battery saver function OFF. | ||
| ROOM LAMP TIMER SET | MODE 3 (1) | 10 min. | Sets interior room lamp battery saver timer operating time. |
| MODE 1 | 15 min. | ||
| MODE 2 | 60 min. | ||
| (1) Initial setting | |||
| (1) | Initial setting |
| Monitor Item [Unit] | Description |
|---|---|
| IGN ON SW [On/Off] | Indicates condition of ignition switch ON position. |
| ACC ON SW [On/Off] | Indicates condition of ignition switch ACC position. |
| HI BEAM SW [On/Off] | Indicates condition of combination switch. |
| HEAD LAMP SW 1 [On/Off] | |
| HEAD LAMP SW 2 [On/Off] | |
| TAIL LAMP SW [On/Off] | |
| PASSING SW [On/Off] | |
| FR FOG SW [On/Off] | |
| DOOR SW-DR [On/Off] | Indicates condition of front door switch LH. |
| DOOR SW-AS [On/Off] | Indicates condition of front door switch RH. |
| DOOR SW-RR [On/Off] | Indicates condition of rear door switch RH. |
| DOOR SW-RL [On/Off] | Indicates condition of rear door switch LH. |
| DOOR SW-BK [On/Off] | Indicates condition of back door switch. |
| TURN SIGNAL R [On/Off] | Indicates condition of combination switch. |
| TURN SIGNAL L [On/Off] | |
| KEY ON SW [On/Off] | Indicates condition of key switch. |
| KEYLESS LOCK [On/Off] | Indicates condition of lock signal from keyfob. |
| PKB SW [On/Off] | Indicates park brake switch signal received from combination meter on CAN communication line. |
| ENGINE RUN [On/Off] | Indicates engine run signal received from ECM on CAN communication line. |
| VEHICLE SPEED [km/h/mph] | Indicates vehicle speed signal received from combination meter on CAN communication line. |
| Support Item | Setting | Description |
|---|---|---|
| BATTERY SAVER SET | On (1) | Exterior lamp battery saver function ON. |
| Off | Exterior lamp battery saver function OFF. | |
| (1) Initial setting | ||
| (1) | Initial setting |
| Monitor Item [Unit] | Description |
|---|---|
| HAZARD SW [On/Off] | Indicates condition of hazard switch. |
| TURN SIGNAL R [On/Off] | Indicates condition of turn signal function of combination switch. |
| TURN SIGNAL L [On/Off] |
| Monitor Item [Unit] | Description |
|---|---|
| TURN SIGNAL R [On/Off] | Indicates condition of right turn signal operation of combination switch. |
| TURN SIGNAL L [On/Off] | Indicates condition of left turn signal operation of combination switch. |
| HI BEAM SW [On/Off] | Indicates condition of Hi beam switch operation of combination switch. |
| HEAD LAMP SW 1 [On/Off] | Indicates condition of head lamp switch 1 operation of combination switch. |
| HEAD LAMP SW 2 [On/Off] | Indicates condition of head lamp switch 2 operation of combination switch. |
| TAIL LAMP SW [On/Off] | Indicates condition of tail lamp switch operation of combination switch. |
| PASSING SW [On/Off] | Indicates condition of passing switch operation of combination switch. |
| FR FOG SW [On/Off] | Indicates condition of front fog lamp switch operation of combination switch. |
| FR WIPER HI [On/Off] | Indicates condition of front wiper operation of combination switch. |
| FR WIPER LOW [On/Off] | |
| FR WIPER INT [On/Off] | |
| FR WASHER SW [On/Off] | |
| INT VOLUME [1 - 7] | Indicates condition of intermittent front wiper operation of combination switch. |
| RR WIPER ON [On/Off] | Indicates condition of rear wiper operation of combination switch. |
| RR WIPER INT [On/Off] | |
| RR WASHER SW [On/Off] |
| Monitor Item [Unit] | Description |
|---|---|
| IGN ON SW [On/Off] | Indicates condition of ignition switch ON position. |
| KEY ON SW [On/Off] | Indicates condition of key switch. |
| DOOR SW-DR [On/Off] | Indicates condition of front door switch LH. |
| DOOR SW-AS [On/Off] | Indicates condition of front door switch RH. |
| DOOR SW-RR [On/Off] | Indicates condition of rear door switch RH. |
| DOOR SW-RL [On/Off] | Indicates condition of rear door switch LH. |
| DOOR SW-BK [On/Off] | Indicates condition of back door switch. |
| CDL LOCK SW [On/Off] | Indicates condition of lock signal from door lock and unlock switch. |
| CDL UNLOCK SW [On/Off] | Indicates condition of unlock signal from door lock and unlock switch. |
| KEYLESS LOCK [On/Off] | Indicates condition of lock signal from keyfob. |
| KEYLESS UNLOCK [On/Off] | Indicates condition of unlock signal from keyfob. |
| KEY CYL LK-SW [On/Off] | Indicates condition of lock signal from door key cylinder switch. |
| KEY CYL UN-SW [On/Off] | Indicates condition of unlock signal from door key cylinder switch. |
| ACC SW [On/Off] | Indicates condition of ignition switch ACC position. |
| Support Item | Setting | Description | |
|---|---|---|---|
| ROOM LAMP TIMER SET | MODE 3 (1) | 10 min. | Sets interior room lamp battery saver timer operating time. |
| MODE 2 | 60 min. | ||
| MODE 1 | 15 min. | ||
| (1) Initial setting | |||
| (1) | Initial setting |
| Monitor Item [Unit] | Main Signals | Description |
|---|---|---|
| MOTOR FAN REQ [1/2/3/4] | X | Indicates cooling fan speed signal received from ECM on CAN communication line |
| AC COMP REQ [On/Off] | X | Indicates A/C compressor request signal received from ECM on CAN communication line |
| TAIL & CLR REQ [On/Off] | X | Indicates position light request signal received from BCM on CAN communication line |
| HL LO REQ [On/Off] | X | Indicates low beam request signal received from BCM on CAN communication line |
| HL HI REQ [On/Off] | X | Indicates high beam request signal received from BCM on CAN communication line |
| FR FOG REQ [On/Off] | X | Indicates front fog light request signal received from BCM on CAN communication line |
| FR WIP REQ [Stop/1LOW/Low/Hi] | X | Indicates front wiper request signal received from BCM on CAN communication line |
| WIP AUTO STOP [STOP P/ACT P] | X | Indicates condition of front wiper auto stop signal |
| WIP PROT [Off/BLOCK] | X | Indicates condition of front wiper fail-safe operation |
| IGN RLY1-REQ [On/Off] | Indicates ignition switch ON signal received from BCM on CAN communication line | |
| IGN RLY [On/Off] | X | Indicates condition of ignition relay |
| PUSH SW [On/Off] | Indicates condition of push-button ignition switch | |
| INTER/NP SW [On/Off] | Indicates condition of CVT shift position | |
| ST RLY CONT [On/Off] | Indicates starter relay status signal received from BCM on CAN communication line | |
| IHBT RLY-REQ [On/Off] | Indicates starter control relay signal received from BCM on CAN communication line | |
| ST/INHI RLY [Off/ST/INHI] | Indicates condition of starter relay and starter control relay | |
| DETENT SW [On/Off] | Indicates condition of CVT shift selector (park position switch) | |
| DTRL REQ [Off] | Indicates daytime light request signal received from BCM on CAN communication line | |
| THFT HRN REQ [On/Off] | Indicates theft warning horn request signal received from BCM on CAN communication line | |
| HORN CHIRP [On/Off] | Indicates horn reminder signal received from BCM on CAN communication line |