Contents Section: Procedures All sections

Maintenance (Except Crosscabriolet): Adjustments Nissan Murano Z51 рестайлинг 2

Procedures 2 illustrations ~173 words

DRIVE BELT: Tension Adjustment

Refer to " DRIVE BELT ".

Scheme 1

Scheme 1: LEVEL
  1. Check if the reservoir tank engine coolant level is within the "MIN" to "MAX" when the engine is cool.
  2. Adjust the engine coolant level if necessary. CAUTION: Refill Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent in its quality mixed with water (distilled or demineralized). Refer to " «FOR NORTH AMERICA: FLUIDS AND LUBRICANTS»(ref-593952-S08251588282014012200000) " (FOR NORTH AMERICA). or " «FOR MEXICO: FLUIDS AND LUBRICANTS»(ref-593952-S06460832132014012200000) " (FOR MEXICO).

Scheme 2

Scheme 2: LEAKAGE
  1. To check for leakage, apply pressure to the cooling system with the radiator cap tester (commercial service tool) (A) and radiator cap tester adapter (commercial service tool) (B). Testing pressure: Refer to " «RADIATOR»(ref-593940-S18768960172014012200000) ". WARNING: Never remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from radiator. CAUTION: Higher test pressure than specified may cause radiator damage. NOTE: In a case that engine coolant decreases, replenish radiator with engine coolant.
  2. If anything is found, repair or replace damaged parts.