Function and System Application
| Diagnostic test mode | Function | ENGINE | TRANSMISSION | ALL MODE AWD/4WD | AIR BAG | METER A/C AMP | BCM | IPDM E/R | AUTO DRIVE POS. | ABS | ABS (Including VDC) | AIR PRESSURE MONITOR | NVIS (NATS) | REARVIEW CAMERA | INTELLIGENT KEY |
|---|
| Work support | This mode enables a technician to adjust some devices faster and more accurately by following the indications on CONSULT-II. | X | X | | | | X | | X | | X | X | | X | X |
| Self-diagnostic results | Self-diagnostic results can be read and erased quickly. | X | X | X | X | X | X | X | X | X | X | X | X | | X |
| Trouble diagnostic record | Current self-diagnostic results and all trouble diagnostic records previously stored can be read. | | | | X | | | | | | | | | | |
| Data monitor | Input/Output data in the ECM can be read. | X | X | X | | X | X | X | X | X | X | X | | X | X |
| CAN diagnosis support monitor | The communication condition of CAN communication line can be indicated. | X | X | X | | X | X | X | X | X | X | X | | | X |
| Active test | Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ECMs and also shifts some parameters in a specified range. | X | | X | | | X | X | X | X | X | | | | X |
| DTC confirmation | The results of SRT (System Readness Test) and the self-diagnosis status/result can be confirmed. | X | | | | | | | | | | | | | |
| DTC work support | The operating condition to confirm Diagnosis Trouble Codes can be selected. | X | | | | | | | | | | | | | |
| ECM (ECU) part number | ECM (ECU) part number can be read. | X | X | X | | | X | | X | X | X | X | | X | X |
| ECU discriminated No. | Classification number of a replacement ECU can be read to prevent an incorrect ECU from being installed. | | | | X | | | | | | | | | | |
| Function test | This mode can show results of self-diagnosis of ECU with either "OK" or "NG". For engines, more practical tests regarding sensors/switches and/or actuators are available. | X | X | | X | | | | | X | X | | | | |
| Control unit initialization | All registered ignition key IDs in NATS components can be initialized and new IDs can be registered. | | | | | | | | | | | | X | | |
| CALIB data | Characteristic information for TCM and CVT assembly can be read. Do not use, but displayed. | | X | | | | | | | | | | | | |
| Configuration (1) | | | | | | | X | | | | | | | | |
| (1) This item is indicated, but it is what it does not use. x: Applicable |
| (1) | This item is indicated, but it is what it does not use. |
FUNCTION AND SYSTEM APPLICATION CHART
