Application Items
| Icon | Description |
|---|---|
| Adjust Driver Seat When Exiting Vehicle (1) | The driver's seat automatically moves back and returns to the original position for ease of exit and entry. |
| Selective Door Unlock (2) /Remote Unlock Driver's Door First | This key can switch the unlock doors of the 1st unlocking operation as follows: ON (Only the driver side door) <==> OFF (All the doors) |
| Keyless Remote Response - Horn (3) | This key changes the horn chirp mode that occurs when pushing the LOCK button on the Intelligent Key or the keyfob. |
| Keyless Remote Response - Lights (3) | This key changes the hazard indicator flash mode that occurs when pushing the LOCK or UNLOCK button on the Intelligent Key or the keyfob. |
| Auto Re-Lock Time | The length of the auto door re-lock time can be set. Select the "Auto Re-Lock time" key, then move the joystick and push the ENTER button to adjust the time. |
| Sensitivity of Automatic Headlights | Automatic light illumination can be set as desired. Select the "Sensitivity of Automatic Headlights" key, then move joystick to the left (lower) or right (higher). |
| Automatic Headlights Off Delay | You can control how long it takes the automatic turn off timer to extinguish the headlights in the AUTO position. Select the "Automatic Headlights Off Delay" key, then move the joystick to the left or right to adjust the timer. |
| Speed Dependent Wiper | This key turns on and off the driving speed dependent intermittent wiper function. |
| Intelligent Key Lock Response - Sound (4) | The sound pattern of the Intelligent request switch operation can be set as desired. Select the "Intelligent Key lock response - Sound" key, then push the ENTER button to change the sound pattern. |
| Intelligent Key Unlock Response - Sound (4) | The beep sounds when unlocking door with the Intelligent request switch can be turned on or off. |
| Return All Settings to Default | When this key is selected and turned on using the "ENTER" button, all settings made by VEHICLE ELECTRONICS will return to the initial conditions. |
| (1) If so equipped. (2) If Intelligent Key is equipped. (3) Even if you change the horn chirp or the hazard flash with the keyfob or the Intelligent Key, the change may not be reflected in the display. Use the keyfob or the Intelligent Key to return to the previous mode. (4) If Intelligent Key is equipped. | |
| (1) | If so equipped. |
| (2) | If Intelligent Key is equipped. |
| (3) | Even if you change the horn chirp or the hazard flash with the keyfob or the Intelligent Key, the change may not be reflected in the display. Use the keyfob or the Intelligent Key to return to the previous mode. |
| (4) | If Intelligent Key is equipped. |
VEHICLE ELECTRONIC SYSTEMS DISPLAY DESCRIPTION
| Icon | Description | Reference |
|---|---|---|
| Language/Unit | Settings of Language or unit can be performed. | Language Setting |
| Clock | Settings of clock can be performed. | Clock Settings |
| Beep Setting | Settings of Beep sound can be performed. | Beep Setting |
SYSTEM SETTINGS DESCRIPTION
| Icon | Description | Reference |
|---|---|---|
| View | Map display mode can be switched. | "VIEW" MODE |
| Heading | Heading of the map display can be customized for either north heading or the actual driving direction of the vehicle. | "HEADING" MODE |
| Nearby Display Icons | Icons of facilities can be displayed. Facilities to be displayed can be selected from the variety selections. | "NEARBY DISPLAY ICONS" MODE |
| Save Current Location. | Current vehicle location can be registered in Address Book | "SAVE CURRENT LOCATION" MODE |
| Adjust Current Location | Current location of position marker can be adjusted. Direction of position marker also can be calibrated when heading direction of the vehicle on the display is not matched with the actual direction. | "ADJUST CURRENT LOCATION" MODE |
| Auto Re-route On/Off | ON/OFF of Auto Re-route can be switched. | "AUTO RE-ROUTE" MODE |
| Avoid Area Setting | A particular area can be avoided when routing. | "AVOID AREA SETTINGS" MODE |
| Clear Memory | Address Book, Previous destination or Avoid area can be deleted. | "CLEAR MEMORY" MODE |
| Edit Address Book | Address Book can be edited. | "EDIT ADDRESS BOOK" MODE |
| GPS Information | The GPS data includes longitude, latitude and altitude (distance above sea level) of the present vehicle position, and current date and time for the area in which the vehicle is being driven. Also indicated are the GPS reception conditions and the GPS satellite position. | "GPS INFORMATION" MODE |
| Quick Stop Customer Setting | One facility of your selection can be added to your Quick Stop. | "QUICK STOP CUSTOMER SETTING" MODE |
| Set Average Speed for Estimated Journey Time | Average vehicle speed can be set to calibrate estimated journey time for the destination. | "SET AVERAGE SPEED" MODE |
| Tracking On/Off | Tracking to the present vehicle position can be displayed. | "TRACKING" MODE |
NAVIGATION SETTINGS DESCRIPTION
Scheme 243
- To open the map screen display with BIRDVIEW; select "BIRDVIEW"
- To open the map screen display with Plan View, select "Plan View".
Scheme 244
- To display North up, select "North up".
- To display the car heading up, select "Heading up".
Scheme 245
- Select an icon to display on the map screen.
Scheme 246
- The current vehicle location can be registered in "Address Book". NOTE: "Address Book" can store 50 items max.
Scheme 247
Scheme 248
- Select an icon "right" or "left" to calibrate the heading direction. (Arrow marks will rotate corresponding to the calibration key.)
- Select "Set". Then the vehicle mark will be matched to the arrow mark.
Scheme 249
- To activate "AUTO RE-ROUTE" mode, select "On".
- To dis-activate "AUTO RE-ROUTE" mode, select "Off".
Scheme 250
- Areas to avoid can be registered.
Scheme 251
- To delete all the stored places in "Address Book", "Avoid Area" and "Previous Dest", select "Yes".
Scheme 252
- Edit the items registered in Address Book.
Scheme 253
- Latitude, longitude, altitude, astrometric state, and satellite location are displayed as GPS information. NOTE: Altitude is displayed only in three-dimensional status.
Scheme 254
- Select a category for the "Quick Stop" menu.
Scheme 255
- Set the average vehicle speed to calibrate the estimated journey time for the destination.
- Set three items; "Freeway", "Main Roads", and "Ordinary Roads".
Scheme 256
- To delete the tracking marks on the map, select "Off".
- To leave the tracking marks on the map, select "On". NOTE: When a trail display is turned Off, trail data is erased from the memory.