Home/Nissan/Murano/Nissan Murano Z50 (2002-2008)/Repair manual/Charging System/Starting & Charging System: Specifications
Contents Wiring diagrams Section: Charging System All sections

Starting & Charging System: Specifications Nissan Murano Z50

Charging System 3 illustrations

MINIMUM SPECIFICATION OF CRANKING VOLTAGE REFERENCING COOLANT TEMPERATURE

Engine coolant temperatureVoltage [V]
30°C to -20°C (-22°F to -4°F)8.4
19°C to -10°C (-2°F to 14°F)8.9
9°C to 0°C (16°F to 32°F)9.3
More than 1°C (More than 34°F)9.7

MINIMUM SPECIFICATION OF CRANKING VOLTAGE REFERENCING COOLANT TEMPERATURE

Scheme 1

Scheme 1: Removal and Installation

Scheme 2

Scheme 2: REMOVAL

Scheme 3

Scheme 3
  1. Remove battery. Refer to «REMOVAL AND INSTALLATION»(ref-234023-S25925822202006052700000) .
  2. Remove air duct (inlet). Refer to «AIR CLEANER AND AIR DUCT»(ref-233993-S13601402462006052800000) .
  3. Remove battery bracket, using power tools.
  4. Remove fluid charging pipe. Refer to «REMOVAL AND INSTALLATION»(ref-234000-S10895455822006052800000) .
  5. Disconnect "S" connector.
  6. Remove "B" terminal nut.
  7. Remove starter motor mounting bolts, using power tools.
  8. Remove starter motor upward from the vehicle.