Home ReviewsRefund
Home/Nissan/Maxima/Nissan Maxima A35 (2008-2014)/Repair manual/Exterior Lighting System/Component Function Check
Contents Wiring diagrams Section: Exterior Lighting System All sections

Component Function Check Nissan Maxima A35

Exterior Lighting System ~530 words

Component Function Check

  1. CHECK HEADLAMP (HI) OPERATION WITHOUT CONSULT-III Start IPDM E/R auto active test. Refer to " «DIAGNOSIS DESCRIPTION»(ref-388055-S22102347422011022800000) ". Check that the headlamp switches to the high beam. NOTE: HI/LO is repeated 1 second each when using the IPDM E/R auto active test. CONSULT-III Select "EXTERNAL LAMPS" of IPDM E/R active test item. While operating the test item, check that the headlamp switches to the high beam. HI : Headlamp switches to the high beam. OFF : Headlamp OFF Does the headlamp switch to the high beam? YES >> Headlamp (HI) circuit is normal. NO >> Refer to " «DIAGNOSIS PROCEDURE»(ref-388067-S32224371952011022800000) ".
  1. CHECK HEADLAMP (LO) OPERATION WITHOUT CONSULT-III Start IPDM E/R auto active test. Refer to " «DIAGNOSIS DESCRIPTION»(ref-388055-S22102347422011022800000) ". Check that the headlamp is turned ON. NOTE: HI/LO is repeated 1 second each when using the IPDM E/R auto active test. CONSULT-III Select "EXTERNAL LAMPS" of IPDM E/R active test item. While operating the test item, check that the headlamp is turned ON. LO : Headlamp ON OFF : Headlamp OFF Is the headlamp turned ON? YES >> Headlamp (LO) is normal. NO >> Refer to " «DIAGNOSIS PROCEDURE»(ref-388067-S23908776092011022800000) ".
  1. CHECK FRONT FOG LAMP OPERATION WITHOUT CONSULT-III Activate IPDM E/R auto active test. Refer to " «DIAGNOSIS DESCRIPTION»(ref-388055-S22102347422011022800000) ". Check that the front fog lamp is turned ON. CONSULT-III Select "EXTERNAL LAMPS" of IPDM E/R active test item. While operating the test item, check that the front fog lamp is turned ON. FOG : Front fog lamp ON OFF : Front fog lamp OFF Is the front fog lamp turned ON? YES >> Front fog lamp circuit is normal. NO >> Refer to " «DIAGNOSIS PROCEDURE»(ref-388067-S07492253932011022800000) ".
  1. CHECK PARKING LAMP OPERATION WITHOUT CONSULT-III Activate IPDM E/R auto active test. Refer to " «DIAGNOSIS DESCRIPTION»(ref-388055-S22102347422011022800000) ". Check that the parking lamp is turned ON. CONSULT-III Select "EXTERNAL LAMPS" of IPDM E/R active test item. While operating the test item, check that the parking lamp is turned ON. TAIL : Parking lamp ON OFF : Parking lamp OFF Is the parking lamp turned ON? YES >> Parking lamp circuit is normal. NO >> Refer to " «DIAGNOSIS PROCEDURE»(ref-388067-S30520059602011022800000) ".
  1. CHECK TURN SIGNAL LAMP CONSULT-III Select "FLASHER" of BCM (FLASHER) active test item. While operating the test item, check that the turn signal lamp blinks. LH : Turn signal lamp LH blinking RH : Turn signal lamp RH blinking OFF : The turn signal lamp OFF Does the turn signal lamp blink? YES >> Turn signal lamp circuit is normal. NO >> Refer to " «DIAGNOSIS PROCEDURE»(ref-388067-S00177370092011022800000) ".
  1. CHECK OPTICAL SENSOR SIGNAL BY CONSULT-III CONSULT-III Turn the ignition switch ON. Select "OPTICAL SENSOR" of BCM (HEAD LAMP) DATA MONITOR item. Turn the lighting switch to AUTO. While the auto light system is operating, check the monitor status. CONNECTOR TERMINAL REFERENCE CHART Monitor item Condition Voltage OPTICAL SENSOR When illuminating 3.1V or more (1) When shutting off light 0.6V or less (1) Illuminates the optical sensor. The value may be less than the standard value if brightness is weak. Is the item status normal? YES >> Optical sensor is normal. NO >> Refer to " «DIAGNOSIS PROCEDURE»(ref-388067-S01398138892011022800000) ".