Home/Nissan/Maxima/Nissan Maxima A32 (1994-2000)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul 3.0: Other
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul 3.0: Other Nissan Maxima A32

DISTRIBUTOR

Note. Maxima is equipped with Distributorless Ignition System (DIS).

CAMSHAFT POSITION SENSOR

Note. The camshaft position sensor is mounted on front of left side exhaust camshaft.

FUEL SYSTEM

WARNINGAlways relieve fuel pressure before disconnecting any fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.

FUEL SYSTEM PRESSURE RELEASE

To relieve fuel system pressure, remove fuel pump fuse. Start engine and allow to run until fuel is exhausted and engine stalls. Crank engine an additional 2 or 3 times to verify all pressure has dissipated. Turn ignition off. Install fuel pump fuse or relay.

FUEL PUMP

Note. Fuel pump is located in fuel tank. If vehicle is not equipped with a maintenance access cover for fuel pump service, remove fuel tank.

FUEL FILTER

ApplicationLocation
MaximaOn Left Side Of Engine compartment near brake master cylinder.

FUEL FILTER LOCATION