Home ReviewsRefund
Home/Nissan/Juke/Nissan Juke I facelift (2014-2019)/Repair manual/Engine Control Systems/Accelerator Control System: Diagnosis
Contents Wiring diagrams Section: Engine Control Systems All sections

Accelerator Control System: Diagnosis Nissan Juke I facelift

Engine Control Systems

INSPECTION AFTER INSTALLATION

  1. Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.
  2. Check accelerator pedal securely returns to the fully released position.
  3. For the electrical inspection of accelerator pedal position sensor. Refer to " «COMPONENT INSPECTION»(ref-621379-S35695279752014061000000) ", " «COMPONENT INSPECTION»(ref-621379-S29416484652014061000000) " and " «COMPONENT INSPECTION»(ref-621379-S30756467822014061000000) ".
CAUTIONWhen harness connector of accelerator pedal position sensor is disconnected, perform " ACCELERATOR PEDAL RELEASED POSITION LEARNING ". Refer to following. Refer to " WORK PROCEDURE ".

More articles — Accelerator Control System