Torque Converter Clutch Solenoid
The solenoid is switched "OFF" to release the lock-up.
Installation and Inspection of Torque Converter
- After inserting a torque converter to a transmission, be sure to check distance A to ensure it is within specifications. Distance A : 24.0 mm (0.94 in) or more
General Specification
| Applied model | 2WD | 4WD |
|---|
| Automatic transmission model | RE5 R05A |
| Transmission model code number | 3DX2C | 3DX2D, 3DX3B |
| Stall torque ratio | 2.0 : 1 |
| Transmission gear ratio | 1st | 3.827 |
| 2nd | 2.368 |
| 3rd | 1.520 |
| 4th | 1.000 |
| 5th | 0.834 |
| Reverse | 2.613 |
| Recommended fluid | Genuine NISSAN Matic S ATF (1) |
| Fluid capacity | 10.6 liter (11-1/4 US qt, 9-3/8 Imp qt) (2) |
| CAUTION: If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using ATF other than Genuine NISSAN Matic S ATF or Matic J ATF will cause deterioration driveability and A/T durability, and may damage the A/T, which is not covered by the NISSAN new vehicle limited warranty. |
| (1) Refer to " FOR USA AND CANADA " (2) The fluid capacity is the reference value. Check the fluid level with A/T fluid level gauge. |
| CAUTION |
|---|
| If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using ATF other than Genuine NISSAN Matic S ATF or Matic J ATF will cause deterioration driveability and A/T durability, and may damage the A/T, which is not covered by the NISSAN new vehicle limited warranty. |
| (1) | Refer to " FOR USA AND CANADA " |
| (2) | The fluid capacity is the reference value. Check the fluid level with A/T fluid level gauge. |
Torque Converter
| Distance between end of converter housing and torque converter mm (in) | 24.0 (0.94) or more |
TORQUE CONVERTER SPECIFICATIONS
