CHECKING AND ADJUSTING
| CAUTION | If excessive lubricant leakage is noted, do not perform the lubricant return operation. |
Start the engine and set the following conditions
Test condition
- Engine speed: Idling to 1,200 RPM
- A/C switch: On
- Blower speed: Max. position
- Temp. control: Optional [Set so that intake air temperature is 25° to 30°C (77° to 86°F).]
- Intake position: Recirculation
- Perform lubricant return operation for about ten minutes
Adjust the lubricant quantity according to the following table.