SMJ INSTALLATION
To install SMJ, tighten bolts until orange "fulltight" mark appears and then retighten to specified torque as required.
- SMJ: 3 - 5 N.m (0.3 - 0.5 kg-m, 26 - 43 in-lb)
| CAUTION | Do not overtighten bolts, otherwise, they may be damaged. |
Scheme 20
NICKEL METAL HYDRIDE BATTERY REPLACEMENT
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following
| WARNING | Replace the nickel metal hydride battery with Genuine CONSULT-II battery only. Use of another battery may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble or dispose of in fire. |
Keep the battery out of reach of children and discard used battery conforming to the local regulations.