Contents Section: Communication Devices All sections

Driver Information System: Overview Nissan Altima L31 рестайлинг

Communication Devices 19 illustrations ~124 words

CAN Communication System Description

Refer to " CAN COMMUNICATION ".

Scheme 471

Scheme 471: CHECK

Scheme 472

Scheme 472: Schematic

Scheme 473

Scheme 473: Wiring Diagram-METER

Scheme 474

Scheme 474

Scheme 475

Scheme 475: Terminals and Reference Value for Combination Meter

Refer to " CAN COMMUNICATION ".

Scheme 476

Scheme 476: Schematic

Scheme 477

Scheme 477: Wiring Diagram-WARN

Scheme 478

Scheme 478

Scheme 479

Scheme 479

Scheme 480

Scheme 480

Scheme 481

Scheme 481: Terminals And Reference Value For BCM

Refer to " CAN COMMUNICATION ".

CONSULT-II BASIC OPERATION PROCEDURE

CAUTIONIf CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.

Scheme 482

Scheme 482

Scheme 483

Scheme 483

Scheme 484

Scheme 484

Scheme 485

Scheme 485
  1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, and turn the ignition switch ON.
  2. Touch "START (NISSAN BASED VHCL)".
  3. Touch "BCM".
  4. Touch "BUZZER" or "BCM".
  5. Select "DATA MONITOR" "ACTIVE TEST" or "SELF-DIAG RESULTS".

Refer to " CAN COMMUNICATION ".

Scheme 486

Scheme 486: Schematic

Scheme 487

Scheme 487: Wiring Diagram-B/COMP

Scheme 488

Scheme 488

Scheme 489

Scheme 489