TROUBLE DIAGNOSES WITH BATTERY/STARTING/CHARGING SYSTEM TESTER
Note. To ensure a complete and thorough diagnosis, the battery, starter and generator test segments must be done as a set from start to finish.
- Turn off all loads on the vehicle electrical system.
- Perform battery test with Battery/Starting/Charging system tester. (Scheme 2)
- Press "ENTER" to begin the starting system test.
- Start the engine.
- Diagnosis result is displayed on the tester. See «DIAGNOSTIC RESULT ITEM»(ref-152835-S32039078062003030300000).
Scheme 2
DIAGNOSTIC RESULT ITEM
Note. For Work Flow, see WORK FLOW , and for Trouble Diagnoses With Battery/Starting/Charging System Tester, see TROUBLE DIAGNOSES WITH BATTERY/STARTING/CHARGING SYSTEM TESTER .
Scheme 3
DIAGNOSTIC PROCEDURE 1, CHECK "B" TERMINAL CIRCUIT
- For step 1 (Scheme 4)
- For step 2 (Scheme 5)
- For step 3 (Scheme 6)
Scheme 4
Scheme 5
Scheme 6
DIAGNOSTIC PROCEDURE 2, CHECK "S" TERMINAL CIRCUIT
- For step 1 (Scheme 7)
- For step 2 (Scheme 8)
