TIRE SPECIFICATIONS
Tire specifications are imprinted on the tire side wall. The recommended cold tire inflation pressures are listed on a label attached to the center console lid. Pressures must never exceed the maximum values molded onto tire side wall.
| CAUTION | DO NOT mix tires of different design such as radial with bias or bias-belted tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. DO NOT use tire chains on spare wheels. |
| WARNING | After rotating the tires, adjust the tire pressure. Retighten the wheel nuts after the aluminum wheels have been run for the first 600 miles (1000Km) (also in cases of a flat tire, etc.). Do not include the T-type spare tire or any other small size spare tire in the tire rotation. |
WHEEL TIGHTENING
| Application | Ft. lb. (N.m.) |
|---|
| Front & Rear | 72-87 (98-118) |
WHEEL TIGHTENING SPECIFICATIONS
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, drive ability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section. |
If battery is replaced, it should be of the same group number as shown on the original battery's label.
