TORQUE SPECIFICATIONS
For 2003 Torque Specifications, see TORQUE SPECIFICATIONS (2003) table.
| Application | Ft. Lbs. (N.m) |
|---|
| Brake Booster Push Rod Lock Nut | 12-15 (16-22) |
| Brake Hose To Caliper Mounting Bolt (CLZ25VD & AD14VE) (1) | 13-14 (17-20) |
| Brake Tube Flare Nut-To- Caliper (OPB27VA & OPB13VB) (1) | 13-14 (17-20) |
| Flare Nut | 11-13 (15-18) |
| Front Caliper |
| (CLZ25VD) (1) | 17-22 (7-9) |
| (OPB27VA) (1) | 112 (152) |
| Front Torque Member (CLZ25VD) (1) | 113-114 (152-155) |
| Rear Caliper | 32 (43) |
| (AD14VE) (1) | 28-36 (37-49) |
| (OPB13VB) (1) | 53-71 (71.6-97.0) |
| Rear Hub Nut | 152-202 (206-274) |
| Rear Torque Member (AD14VE) (1) | 53-71 (71.6-97.0) |
| Wheel Lug Nuts | 72-87 (98-118) |
| INCH Lbs. (N.m) |
| Brake Bleeder Screw |
| (CLZ25VD & AD14VE) (1) | 61-86 (7-10) |
| (OPB27VA & OPB13VB) (1) | 61-86 (108-132) |
| Brake Pedal Bracket | 125.6 (14.2) |
| Booster Mount Nut | 125.6 (14.2) |
| Master Cylinder To Booster | 120 (13.5) |
| (1) See MODEL IDENTIFICATION . |
| (1) | See MODEL IDENTIFICATION . |
TORQUE SPECIFICATIONS (2003)
For 2003 Disc Brake Specifications, see DISC BRAKE SPECIFICATIONS (2003) table.
| Application | In. (mm) |
|---|
| Booster Output Rod Length (1) |
| With Traction Control (TCS) | .409 (10.4) |
| With Vehicle Dynamic Control (VDC) | .244 (-6.2) |
| Disc Runout |
| Front (Attached To Vehicle) |
| Brembo® (OPB27VA) (2) | Less Than.0020 (.05) |
| Standard (CLZ25VD) (2) | Less Than.0014 (.035) |
| Rear (Attached To Vehicle) |
| Brembo® (OPB13VB) (2) | Less Than.0028 (.07) |
| Standard (AD14VE) (2) | Less Than.0039 (.10) |
| Disc Pad Wear Limit | .079 (2.0) |
| Rotor Minimum Thickness |
| Front |
| Brembo® (OPB27VA) (2) | 1.118 (28.4) |
| Standard (CLZ25VD) (2) | .866 (22.0) |
| Rear |
| Brembo® (OPB13VB) (2) | .795 (20.2) |
| Standard (AD14VE) (2) | .551 (.14.0) |
| Parking Brake Shoe Lining Limit | .059 (1.5) |
| (1) With 19.69 in. Hg of vacuum applied to booster. (2) See MODEL IDENTIFICATION . |
| (1) | With 19.69 in. Hg of vacuum applied to booster. |
| (2) | See MODEL IDENTIFICATION . |
DISC BRAKE SPECIFICATIONS (2003)
