GENERATOR SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Generator Model | A3TG0191, MITSUBISHI | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 37 Amps | |
| At 2500 RPM | 92 Amps | |
| At 5000 RPM | 103 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .197 in. (5.00 mm) | |
| Brush Spring Pressure | 17.62-21.94 ozs. (4.90-6.10 N) | |
| Slip Ring Minimum Outer Diameter | 0.870 in. (22.10 mm) | |
| Rotor (Field Coil) Resistance | 1.7-2.1 Ohms | |
GENERATOR SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Generator Stay Mounting Bolt | 18-23 (24-31) |
| Generator Lower Mounting Bolt | 18-23 (24-31) |
| Generator Upper Mounting Bolt | 44-51 (60-69) |
| Generator Pulley Nut | 73-101 (99-137) |
| INCH Lbs. (N.m) | |
| "B" Terminal Connector Nut | 80-97 (9-11) |
TORQUE SPECIFICATIONS