Home ReviewsRefund
Home/Nissan/240SX/Nissan 240SX S14 (1994-1999)/Repair manual/Mechanical/Cooling System Bleeding: Overview
Contents Wiring diagrams Section: Mechanical All sections

Cooling System Bleeding: Overview Nissan 240SX S14

Mechanical 1 illustration ~106 words
  1. Move temperature control lever to HOT position. Loosen air relief plug. (Scheme 2) Fill radiator. Tighten air relief plug.
  2. Install and tighten radiator cap. Operate engine until warm. Race engine 2 or 3 times under no load. Stop engine and allow it to cool. Remove radiator cap. Loosen air relief plug. Fill radiator. Tighten air relief plug.
  3. Install and tighten radiator cap. Operate engine until warm. Race engine 2 or 3 times under no load. Stop engine and allow it to cool. Remove radiator cap. Start engine. Fill radiator slowly to allow air in system to escape. Fill coolant reservoir.

Scheme 2

Scheme 2
Scheme 2

More articles — Cooling System Bleeding