GENERAL SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Master cylinder | Type | Tandem type | |
| I.D. mm (in) | 20.6 (0.81) | ||
| Brake booster | Type | Vacuum type, single | |
| Effective dia. of power cylinder mm (in) | 255 (10.0) | ||
| Boosting ratio | 8.5 (Pedal pressure: 160N) | ||
| Rear wheel hydraulic control method | Electronic control braking force distribution system (EBD) | ||
| Front brake | Type (Disk brake nomenclature) | Floating caliper 1 piston ventilated disk (V6-S57) | |
| Brake disk effective dia x thickness mm (in) | 241 x 26 (9.5 x 1.02) | ||
| Cylinder I.D. mm (in) | 57.1 (2.25) | ||
| Brake pad thickness mm (in) | 10.0 (0.39) | ||
| Clearance adjustment | Automatic adjustment | ||
| Rear brake | Type (Disk brake nomenclature) | 2.4L Engine: 5 persons seat | Floating caliper 1 piston solid disk (S6-S35) |
| 2.4L Engine: 7 persons seat, 3.0L Engine | Floating caliper 1 piston solid disk (S6-S38) | ||
| Brake disk effective dia x thickness mm (in) | 258 x 10 (10.2 x 0.39) | ||
| Cylinder I.D. mm (in) | 2.4L Engine: 5 persons seat | 34.9 (1.37) | |
| 2.4L Engine: 7 persons seat, 3.0L Engine | 38.1 (1.50) | ||
| Brake pad thickness mm (in) | 10.0 (0.39) | ||
| Clearance adjustment | Automatic adjustment | ||
GENERAL SPECIFICATIONS
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | |
|---|---|---|---|
| Brake pedal height mm (in) | 221.8 - 227.8 (8.7 - 9.0) | ||
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 75.8 - 80.2 (2.98 - 3.16) | ||
| Brake pedal play mm (in) | 3 - 8 (0.12 - 0.31) | ||
| Pedal-to-floor clearance when brake pedal is depressed mm (in) (Pedal depression force: approx. 500 N) | 80 (3.15) or more | ||
| Fluid pressure generated by brake booster non-servo effect test kPa (psi) | Pedal depression force: 100 N | 0 - 600 (0 - 87.0) | |
| Pedal depression force: 300 N | 1,030 - 2,220 (149.4 - 322.0) | ||
| Fluid pressure generated by brake booster servo effect test kPa (psi) | Pedal depression force: 100 N | 6,030 - 7,780 (874.5 - 1,128.4) | |
| Pedal depression force: 300 N | 10,370 - 11,560 (1,504.0 - 1,676.6) | ||
| Front disc brake | Pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) |
| Brake disc thickness mm (in) | 26.0 (1.02) | 24.4 (0.96) | |
| Brake disc runout mm (in) | 0.06 (0.0024) | ||
| Brake drag force N (lb) | 68 (15.3) or less | ||
| Rear disc brake | Pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) |
| Brake disc thickness mm (in) | 10.0 (0.39) | 8.4 (0.33) | |
| Brake disc runout mm (in) | 0.08 (0.0032) | ||
| Brake drag force N (lb) | 68 (15.3) or less | ||
| Brake pedal distortion mm (in) | 250 - 254 (9.8 - 10.0) | ||
SERVICE SPECIFICATIONS